Sonoma County · San Francisco Bay Area
Mold testing in Windsor, CA
Mold testing in Windsor starts at $395 and includes the local visit, accredited laboratory analysis and a written result within 24 hours. Mold testing measures what is actually airborne and on surfaces: a sampler pulls a calibrated spore-trap air cassette indoors and one outdoors as a control, adds tape-lift samples from suspect growth, and the laboratory reports spore counts by genus so elevated indoor levels can be proven or ruled out.
Instant price check
What testing costs in Windsor
What do you need tested?
Testing only. We report what the accredited lab finds and never bid the removal or remediation work.
Accredited lab
Third-party analysis
Testing only
No removal sales, ever
Same-day visits
Fast written results
Chain of custody
Tracked from start to finish
Short answer
What does mold testing in Windsor involve?
Mold testing measures what is actually airborne and on surfaces: a sampler pulls a calibrated spore-trap air cassette indoors and one outdoors as a control, adds tape-lift samples from suspect growth, and the laboratory reports spore counts by genus so elevated indoor levels can be proven or ruled out.
- Collection inside Windsor on our San Francisco Bay Area routes, usually same-day or next-morning.
- Independent accredited laboratory analysis: Spore-trap air cassettes and tape-lift or bulk surface samples, analysed by direct microscopy with genus-level spore counts and an indoor-versus-outdoor comparison.
- Written result you can hand to a contractor, landlord, insurer or permit counter.
- Starting price $395 with the laboratory fee already included.
Why Windsor properties come to us for mold testing
Santa Rosa, Petaluma and Sebastopol hold Victorian and 1920s stock alongside big 1955–1978 subdivisions, and thousands of homes have been rebuilt or repaired since the recent fire seasons.
Heavy winter rainfall, river flooding and long summer wildfire smoke seasons make moisture and particulate questions routine here.
What we sample in Windsor
- Indoor spore-trap air cassettes room by room
- An outdoor control cassette taken the same hour
- Tape-lift samples from visible growth on drywall, trim or tile grout
- Bulk samples of wet insulation, carpet pad or subfloor
- Cavity air behind suspect walls where a moisture meter reads high
- Moisture and relative-humidity readings that explain the counts
Local work driving requests in Sonoma County
- Post-fire rebuilds and smoke-damage assessments in Santa Rosa
- Older downtown Petaluma and Sebastopol renovations
- Winery, tasting-room and agricultural building improvements
- Flood and creek-overflow drying in Guerneville and the Russian River corridor
- Pre-1978 repaints and window swaps across Rohnert Park and Cotati
When people call us
- A visible patch appeared after a roof, window or plumbing leak
- A musty smell persists after the area looks dry
- A tenant, buyer or insurer asked for documentation
- Allergy or asthma symptoms track with time spent in one room
- A remediation contractor wants post-work clearance proof
What the written report contains
- Spore counts by genus for every indoor sample
- Outdoor control comparison so indoor elevation is provable
- Moisture and humidity readings per sampled room
- Laboratory accreditation, analyst signature and chain of custody
Applicable oversight in Windsor: BAAQMD Regulation 11 Rule 2, Sonoma County Environmental Health and Cal/OSHA. We report the laboratory numbers — your contractor or the agency decides what happens next.
Structured summary
Mold testing in Windsor — the facts
| Service | Mold testing in Windsor — sample collection, accredited laboratory analysis and a written result. We never sell removal or remediation work. |
|---|---|
| Starting price | $395, laboratory analysis included. Quoted before anyone is dispatched. |
| Laboratory method | Spore-trap air cassettes and tape-lift or bulk surface samples, analysed by direct microscopy with genus-level spore counts and an indoor-versus-outdoor comparison |
| Turnaround | Same-day or next-day collection, written laboratory spore count within 24–48 hours |
| Rating | 5.0 out of 5 from 76 verified customer reviews. |
| Contact | (510) 340-7791 · orders@clearguardenvironmental.com |
The steps
How a Windsor sampling visit runs
01
Tell us what you're about to disturb
Call, text a photo, or fill out the form. We identify the suspect materials, estimate the sample count, and lock in your flat price before anyone is dispatched.
02
A certified inspector collects the samples safely
Each distinct material is wetted down, a coin-sized piece is cut, sealed, labeled and logged under chain of custody. The mark left behind is smaller than a light-switch plate, and the space is left clean.
03
An accredited lab runs the PLM analysis
Samples are examined by Polarized Light Microscopy with dispersion staining — the EPA-recognized method for bulk building materials — with point counting available for borderline results.
04
You get a written report within 24 hours
A PDF lists every sample location, the analytical method, the fiber type detected and the reported percentage.
Independence
A company should not test the material it hopes to remove.
We collect and test material. ClearGuard does not sell removal work, keeping the finding independent. An abatement crew offering a "free inspection" is running a sales call with a lab form attached. We only sell the test, so a clean result and a positive result pay us exactly the same.
- No removal bids, no upsell, no referral kickback
- Every sample goes to an independent, accredited laboratory
- You get material names and percentages, not a vague pass or fail
- If a result is positive, we point you to licensed local abatement crews and exit the job
FAQ
Mold testing questions from Windsor
How much does mold testing cost in Windsor?
Mold testing in Windsor starts at $395, laboratory analysis included. The full price is quoted before anyone is dispatched, and the estimate depends on how many samples the scope needs.
How fast can you sample in Windsor?
Windsor sits inside our San Francisco Bay Area routes, so collection is usually same-day or next-morning and the written laboratory result follows within 24 hours.
Why does Windsor housing need mold testing so often?
Santa Rosa, Petaluma and Sebastopol hold Victorian and 1920s stock alongside big 1955–1978 subdivisions, and thousands of homes have been rebuilt or repaired since the recent fire seasons. Heavy winter rainfall, river flooding and long summer wildfire smoke seasons make moisture and particulate questions routine here.
Do you handle cleanup or removal in Windsor?
No. ClearGuard collects samples and reports independent laboratory results only. Because we never bid the removal or remediation work, the finding cannot be shaped by a sale.
How much does mold testing cost?
Mold testing starts at $395, which covers the visit, one indoor spore-trap sample, the outdoor control and the laboratory spore count. Additional rooms or surface samples are quoted before the visit.
Is a mold test worth it if I can already see the growth?
Yes, for two reasons: the lab identifies the genus, which changes how the cleanup is handled, and an air sample shows whether spores have spread beyond the visible patch into rooms that look clean.
Do you do mold remediation too?
No. We test and report only. A remediation company will read our numbers, but it will never be us selling you the cleanup.